Springfree Trampoline: Installation Overview

Springfree Trampoline: Installation Overview

Articles Blog


Hello I’m Dr. Keith Alexander. I’m the inventor of the Springfree Trampoline, and I’m going to help you assemble your trampoline. If you want to watch these videos while
you’re setting up a trampoline and you’ve got a smart phone, then you can use the QR codes. Find the QR codes in the instructions and you can look at it right there while you’re assembling your trampoline. If you don’t have a smart phone and you want to watch the videos, you can go to the Springfree website and look at them there. The first time you assemble a trampoline you’re going to need two people. Some parts of the assembly of the
trampoline can be a hazard to small children, so keep them away while you’re assembling the trampoline. And you certainly must not be using the trampoline until it’s completely assembled. You should read all the assembly instructions before you start. as much as you don’t like reading instructions you should
take the time to read them. We’ve gone to a lot of trouble to make it easier for you to
read and to understand, and we’ll be here with the videos to help you out if you get stuck. When you’re unwrapping things you really need to use scissors and make sure you don’t use a craft knife because you can cut some of the fabrics, or the mat, or the net. I know you won’t want to do it on purpose but take care and use scissors instead. There’s three important things that we need you to do. We want you to remember that these rods can be really dangerous. So be aware of what you’re told in the instructions and keep your face well clear of them. You should also read the user guide before you jump. It’s got a lot of tips in there about how you should be jumping for the first time and things that you should be aware of. Make sure that you read those and understand those before you jump. If you follow the instructions closely you should be able to assemble your trampoline OK. And I’ll be here to help you along the way if you’ve got your smartphone and your QR codes. Thanks for watching, and get ready to assemble your Springfree Trampoline!

14 thoughts on “Springfree Trampoline: Installation Overview”

  1. Well what if we had a regular trampoline jumped on it set this up then started jumping on the springless on will it be fine if we do that?

  2. I have to say that the spring free trampoline that i and 2 other ppl helped me with today is no where near as simple as the video shows either the mat was to small for the job or they want you to believe it is so easy to erect well i can tell you do not believe the videos that they show because it is very very hard to put together

  3. Also to disassemble – pulling the rods is very tough there is a lot of tension. Use a ratchet strap – hook one end onto the frame and the other on the rod and ratchet it back. Really easy (well not as hard lol!)

  4. Instructions were pretty clear. It took me about 2 hrs to put it together by myself.› › ›https://t.co/O0rHxhut9E   Very sturdy design and built to last long. We are very happy with this trampoline!

  5. >>>t.co/APTjsgtYmp   Playing and jumping inside this trampoline is a great way to spend free time

Leave a Reply

Your email address will not be published. Required fields are marked *